BACK TO:  HomeProducts Catalog |
|
|
|
Model MATS-2010SD
|
|
 |
| Automatic measurement on basic magnetization curve and magnetic hysteresis loop under static state of soft magnetic material, accurate measurement on static magnetic characteristic parameters such as initial permeability μi, maximum permeability μm, saturation magnetic induction Bs, remanence Br, coercive Hc and hysteresis losses Pu. |
|
|
Model MATS-2010H
|
|
 |
| Automatic measurement of the demagnetization curve of permanent magnetic material such as ferrite, AlNiCo, NdFeB, SmCo, etc. Accurate measurement of the magnetic characteristic parameters of remanence Br, coercive force HcB, intrinsic coercive force HcJ and maximum magnetic energy product (BH)max. |
|
|
Model ATS-300M
|
|
 |
| ATS-300M Iron core Magnetic parameters Tester is apply in measuring stator core of Motor(silicon steel), iron core of industrial frequency transformer, finished transformer, amorphous, ultracrystallite and permalloy iron core ( close loop sample) under the condition of frequency 50Hz and 60Hz’s dynamic hysteresis loop, magnetizing curve and power loss curve. |
|
|
|
Model MATS-2010SA
|
|
 |
| Under continuous frequency of 1 kHz to 500 kHz, automatic measurement of magnetic hysteresis loop of the soft magnetic materials such as silicon steel, precision alloy, non-crystal and ferrite, accurate measurement on the dynamic magnetic characteristic parameters such as amplitude permeability μa, loss angle δ, loss iron Pc, remanence Br and coercivity Hc. |
|
|
Model MATS-2010M
|
|
 |
| Automatic measurement of the dynamic magnetic hysteresis loop of oriented and non-oriented silicon steel under the condition of 50 Hz, 60 Hz, 400 Hz and 1 kHz, accurate measurement of the static magnetic characteristic parameters such as amplitude permeability μa, loss angle δ, specific total loss Ps, remanence Br and coercivity Hc. With special testing fixture, it can directly measure the iron core and stator core of the transformer. |
|
|
Model ATS-200M
|
|
 |
| ATS-200M Stalloy iron loss tester (Abv. Core Loss Tester), which is suitable for the manufacturer of motor and transformer. In the scene of raw material stocking or producing, it is used for quickly measuring the quality of stalloy, and also can test the quality of stamping stalloy. |
|
|
|
Model ATS-100M
|
|
 |
| This apparatus is produced in accord with the measuring pattern of the national standard GB/T 13789-92, combined the chip machine control technical with A/D and D/A, sine wave excitation power inside, display the iron loss Ps (W/kg) directly. |
|
|
Model LZ-680
|
|
 |
Brief Introduction
LZ-680 is a desktop gaussmeter which is suitable for both AC ... |
|
|
Model LZ-643
|
|
 |
| LZ-643 is a portable AC and DC gaussmeter among the LZ series gaussmeters. It is used for measuring ... |
|
|
|
Model LZ-630
|
|
 |
| LZ-630 Gauss Meter can be used for measuring DC magnetic field, and also AC magnetic field under 400Hz. It is a practicable desktop gauss meter. |
|
|
Model LZ-620H
|
|
 |
| LZ-620H Gauss Meter can be used for measuring the surface magnet of permanent magnet, residual magnetism of weak magnetic materials and surrounding field. |
|
|
Model LZ-610S
|
|
 |
| LZ-610S Gauss Meter can be used for measuring the surface magnet of all kinds of permanent magnet, especially for the weak field measurement (such as the measurement of deflexion core magnetic field ) |
|
|
|
Model LZ-610H
|
|
 |
| LZ-610H Gaussmter can be used for measuring surface magnet of various permanent magnet, especially for measurement of ferrite, surface magnet of rare earth and center field of motor magnetic tile. |
|
|
Model LZ-840 Flux Meter
|
|
 |
| This Flux Meter can accurately measure magnetic density and magnetic field intensity which holds -400mVs~+400mVs wide range. |
|
|
Model LZ-820B
|
|
 |
| LZ-820B Flux Meter is used for measuring the induction flux of various permanent magnet and the peak value of pulse field. |
|
|
|
Model LZ-810S
|
|
 |
| LZ-810S Flux Meter is used for measuring the magnetic induction flux of all kinds of permanent magnets, convenience for master the whole magnetic property of magnetic steel and magnetic tile. |
|
|
Model MATS-2100RMT
|
|
 |
| Magnet Analyzer - Model MATS-2100RMT is mainly used in measuring the distribution of surface magneti... |
|
|
DJ Series
|
|
 |
demagnetizing field >400Gs
Super efficiency in demagnetizing
No need to move the workpiec... |
|
|
|
MPS-20C Series
|
|
 |
| MPS-20C Capacitance type magnetizer is invented by the Loudi Linkjoin electromagnetic test institution, produced by Hunan Linkjoin Technology Co., Ltd. The power is designed by optimized circuit design, the storage capacitance adopt the high voltage, long lifetime, immerse-oil power. The test method is strict; long working lifetime; strict selection of materials and own the best cost performance. |
|
|
MPS-12C Series
|
|
 |
| MPS series, capacitance type of magnetizer (demagnetizer) power is invented by the Loudi Linkjoin electromagnetic test institution, produced by Hunan Linkjoin Technology Co., Ltd. The power is designed by optimized circuit design, the storage capacitance adopt the high voltage, long lifetime, immerse-oil power. The test method is strict; long working lifetime; strict selection of materials and own the best cost performance. |
|
|
LZ-601
|
|
 |
| Magnetic pole detector is a fast, easy and secure tool for checking the polarity on a magnet. Just point the pen point against the magnet where you want to find out the polarity, press the round button to see the result. A green LED indicates S and a red LED indicates N. It is a very convenient professional device in identifying magnetic filed direction with 100% accuracy. The minimum detectable magnetic field is ±3mT(30Gs) |
|
|
|
Model MATS-2100RMT
|
|
 |
| Magnet Analyzer - Model MATS-2100RMT is mainly used in measuring the distribution of surface magnetic field of multipolar loop, including the peak value, angle, area, width and half height of each magnetic pole. Judge the numbers of poles of the magnetic loop and polarity of magnetic pole automatically and will have a statistical analysis on the measuring result. It can calculate maximum, minimum, mean value and standard deviation, etc. It also can draw X-Y graph and polar coordinate graph. |
|
|
Model TPS-500A
|
|
 |
| It is mainly used in the manufacturer of electronic ballast and energy-saving lamp. It can provide with high frequency sine wave power supply when testing the power dissipation of the soft magnetic material which used in the electronic ballast and energy-saving lamp. |
|
|
Model TPS-500
|
|
 |
| TPS-500 Precision AC Test Power Supply is mainly used for the metrological department, laboratories and factories which produce gauges and instruments. |
|
| |
| BACK TO: HomeProducts Catalog |
